Select a location for
Intel Education
 
Print this page

Dang Hai Pham

University

Hanoi University of Technology

Focus Area

(Manufacturing
Systems & Architecture
Software for Multicore)

Activities with Intel Curriculum Development

Background

B.S  Eng., Hanoi University of Technology, Vietnam
M.S  Eng., University of the Ryukyus, Japan
Dr. Eng., University of the Ryukyus, Japan.

Awards:
IEEE Section Prize student paper award, ICCE2008, Hoi An, Vietnam

Research Interest

System-on-chip, OFDM system design and its applications on wireless communication.

Research Publications

D. H. Pham et al , "Joint hardware-software implementation of an adaptive array antenna for ISDB-T receptions", IEICE Trans. Comm., vol. E89-B, No. 12, pp. 3215-3224, Dec. 2006.

D. H. Pham et al , "Implementation of joint Pre-FFT adaptive array antenna and Post-FFT space diversity combining for mobile ISDB-T receiver", IEICE Trans. Comm., vol. E91-B, No. 12, pp. 127-138, Jan. 2008.

Email phdang@mail.hut.edu.vn
dang.hut@gmail.com

Nguyen Huu Loc

University

University of Technology - Vietnam National University HCMC

Focus Area

Manufacturing Systems

Activities with Intel Curriculum Development

Background

Mechanical Engineering from Belarussian State University of Technology in 1988
Ph. D degree from Belarussian State University of Technology, 1991

Research Interest

Machine design. Reliability based design, Geometric Modelling, Design of experiments.

Research Publications

Reliability-based design and robust design of machine elements.. Proceedings of International symposium on advanced engineering, Pusan, Korea. 2003.

Applications of computer simulation and animation in machine design process. Science and Techno;ogy devolopment Journal, Vol 8, 2005. Page 79-87.

Probabilistic design of mechanical system design. Nguyen Huu Loc. Proceedings of BK21 GSNU-IJU-HCMUT International symposium on Transport Vehicle Engineering, pp. H91- H94.

Reliability - based analysis and design of machine elements using Monte Carlo simulation and response surface methods. Science and Technology devolopment Journal, Vol 12, 2005. Page 56-64.

Reliability - based analysis and design of gear systems. machine elements Science and Technology Journal, Vol 5, 2006. Page 53-60.

Topology optimization of structure using density a generic methods . Science and Technology devolopment Journal, Vol 5, 2008.

Fundamentals of machine design. Textbook. Vietnam National University HCMC Publisher. 3rd edition. 2008.

Problems of machine elements. Textbook, Vietnam National University HCMC Publisher. 3rd edition. 2008.

Reliability - based design and analysis of mechanical systems. Textbook, Publisher of Science and Technology. 2006.

Geometric Modelling with Autodesk Inventor. Publisher of Science and Technology. 2007.

E-mail nhloc@hcmut.edu.vn
nhlcad@yahoo.com

Website

http://www.fme.hcmut.edu.vn

Nguyen Thi Phuong Mai

University

Hanoi University of Technology - HUT

Focus Area

Manufacturing Systems

Activities with Intel Curriculum Development
Research

Background

1981, Engineer Degree - Physic of Engineering (solid state) Hanoi University of Technology, VN

1981-1994, Researcher- Research center of Precise Mechanical Engineering - HUT, VN

10/1998, Master Degree, Precise Mechanical & Optical Engineering, HUT

2000-2001, researcher in Nagaoka University of Technology, Japan

1994 - up to now, Senior Lecturer, Dept. Precise Mechanical & Optical Engineering, Faculty of Mechanical Engineering, HUT

2003, Doctor Degree of  Mechanical Engineering, HUT

9-12/2006-  researcher in CSU Chico, USA

Research Interest

Microelectronics Packaging

Research Publications

Utilized sputter-ion-plating method to enhance surface quality of tools and manufacturing details by TiN layers; Proc.11st Asian-Pacific corrosion control con,; HoChiMinh;

Enhance the quality of tools and manufacturing details by hard coating layer TiN; Proc. 3rd Intl. Workshop on Material Science, IWOM'1999, Hanoi

Status of magnetron sputtering technology coated TiN using in cutting tools; Proc.Intl. sym on Eco-Materials Processing & Design; Asan, Korea, Jan. 2002

Chacterization of TiN film deposited by planar magnetron sputtering method; Advances in Technology of Materials and Materials Processing Journal,vol 2, 2003

Microhardness of TiN films on cutting tools estimated by QM2 at high temperature; Proc.1st Workshop on Regional Network formation for enhancing research and edu. on materials Eng.; Hanoi, 2004

Using thin films for glass-encoder; Proc. 3rd Workshop Regional Network Formation- research & edu. on Materials Eng.; Penang, Malaysia, 8/ 2005

Using transparence encorder for serial measurement robot; Proc. 3rd Workshop Field Wise Seminar on Mechanical and Aeronautical Eng.; KL Malaysia, 2005

Micro-Fabrication of SKD 11 with a Femto-Second Laser; Proc. Of the 20th Scientific Conference, HUT; Hanoi, 10/2006

Designing glass scales with elements manufactured by contact photolithography; Proc. of the Field-wise Seminar on Manufacturing  Engineering; Hanoi, 8/2007

Designing precision moverment system for Seam packer tester; Proceeding of the Field-wise Seminar on Manufacturing Engineering; Hanoi, 8/2007

E-mail

maintp-mcx@mail.hut.edu.vn
npmai2010@yahoo.com

Pham Bach Duong

University

University of Technical Education in Ho Chi Minh City (HCMUTE)

Focus Area

Manufacturing and Automation

Activities with Intel Curriculum Development
Research

Background

Educational Background
2006, Master of Engineering (Mechatronics)
School of Engineering Technology

Asian Institute of Technology, Bangkok, Thailand.
2003, Bachelor of Engineering (Electrical and Electronics)

University of Technical Education in HCMC, Vietnam.
2008, Certificate of Completion of Intel Microelectronics

 Packaging Curriculum Development Workshop, HCMC, Vietnam.

Professional Background
Faculty member of Mechatronics Department, Mechanical Engineering,  since 2003.

HCMUTE Mechatronics Short Courses Program Coordinator from 2006.

Industrial Relations
Industrial Training Programs Collaborator of Saigon Hi-Tech Park.
Ho Chi Minh City, Vietnam

Research Interest

Process Control Systems, Flexible Manufacturing Systems,  Mechatronics.

Research Publications

Pham Bach Duong, Kinematics design and implementation of a robotics assistive walking device for hemiplegic people,  Asian Institute of Technology, 2006.

Hung NT, Duong PB, Phuong NN, Quang NX, Development of a professional industrial training program for Modular Production Systems, 2007. (in Vietnamese)

E-mail

bachduong@hcmute.edu.vn
pbduong@gmail.com

Pham Van Tuan

University

Danang University of Technology, The University of Danang

Focus Area

Manufacturing
Systems & Architecture
Software for Multicore

Activities with Intel Curriculum Development

Background

He received Engineering Degree and Master of Science in Electronics & Telecommunications from Danang University of Technology (1999) and Hanoi University of Technology (2001). In Feb., 2007, he received the Dr. techn. in Electrical Engineering from the SPSC institute, Graz University of Technology, Austria. He has functioned as a Postdoc researcher at the same institute from May 2007 to May 2008.

  • 2008: Reviewer for Conference on Communications and Electronics
  • 2007: Reviewer for Signal Processing, Pattern Recognition, and Applications Conference
  • Since 2005: Reviewer for Speech Communication Journal
  • 2002 - 2007: Research Assistant at SPSC, TUG, Austria.
  • Since 2007: Postdoc Research at Signal Processing & Speech Communication Lab (SPSC), TUG,
  • 2006 - 2010: Leader of WorkPacket2, ROBUST-COAST project ( http://www.coast.at )
  • 2007 - 2008: Senior Researcher of the oneVoice project (Advanced Speech Coder)
  • 2006 - 2007: Researcher of the collaborated project between EEC ( http://www.eurocontrol.int/eec/public/subsite_homepage/homepage.html ) and TUG
  • 2005 - 2006: Senior Researcher of the SNOW project
  • 2005 - 2006: Collaborated Researcher of the MISTRAL project ( http://mistral-project.tugraz.at )
  • 2007 - 2008: Teaching Assistant at TUGraz
  • Since 2008: ASEA-UNINET Coordinator at Danang University of Technology - The University of Danang, Vietnam
  • Since 2008: Lecturer, Faculty of Electronics & Telecommunications, Danang University of Technology - The University of Danang, Vietnam

Research Interest

  • Design and Applications of Microcontroller and DSP
  • Embedded System
  • Machine learning (Neural network, Bayesian network, GMM, HMM) for Signal Processing.
  • Statistics and Probability for Signal Processing.
  • Wavelets and Filter banks.
  • Speech/Audio Processing & Applications:

Research Publications

Tuan V. Pham, "Wavelet Analysis for Robust Speech Processing", VDM - Verlag Dr. Mueller publisher, Jun. 2008.

Michael Neffe, Tuan V. Pham, Horst Hering, Gernot Kubin, "Speaker Segmentation for Air Traffic Control", in book Speaker Classification II, Lecture Notes in Artificial Intelligence , Springer, Sep. 2007

Franz Pernkopf, Tuan V. Pham, Jeff A. Bilmes, "Broad Phonetic Classification Using Discriminative Bayesian Networks", to appear in Speech Communication Journal , 2008.

Tuan V. Pham, M. Stark, Gernot Kubin, "Perceptual Wavelet Filtering For Robust Speech Recognition", Proc. ICASSP , Las Vegas, USA, 2008.

Tuan V. Pham, Michael Starkschnitzer, Franz Pernkopf, Gernot Kubin, "Voice Activity Detection Algorithms Using Subband Power Distance Feature For Noisy Environments", to appear in Interspeech , Brisbane, Australia, 22-26 Sep., 2008.

Tuan V. Pham, Gernot Kubin, Erhard Rank, "Robust Speech Recognition Using Adaptive Noise Threshold Estimation And Wavelet Shrinkage", Proc. IEEE ICCE, Hoi An, Vietnam, 04-06 Feb., 2008

Tuan V. Pham, Michael Neffe, Gernot Kubin, "Robust Voice Activity Detection For Narrow-Bandwidth Speaker Verification Under Adverse Environments", Proc. Interspeech , Antwerp, Belgium, 27-31 Aug., 2007.

Tuan V. Pham, Gernot Kubin, "Low-Complexity and Efficient Classification of Voiced/Unvoiced/Silence for Noisy Environments", Proc. InterSpeech , Pittsburgh, Pennsylvania, USA, 17-21 Sep. 2006.

Tuan V. Pham, Marian Kepesi, Luis Weruaga, Gernot Kubin, "Time-Frequency Analysis for Voice Activity Detection", Proc. SPPRA , Innsbruck, Austria, 15-17 Feb. 2006

Tuan V. Pham, Trung Q. Nguyen, "Wavelet Transform and Image Compression Application", Post & Telecommunications Journal , Hanoi, Vietnam, Mar. 2002

E-mail

phamvt1976@yahoo.co.uk

Tran Thu Ha

University

University of Technical Education in Ho Chi Minh City

Focus Area

Manufacturing and Automation

Activities with Intel Curriculum Development
Research

Background

Bachelor of Electrical and Electronics.
Master of Industrial Management.
Doctor of Engineering (Electronics and Automation).
Institute: Kiev National Technical University, Ucraine

Research Interest

Automatic tele-control, military security systems, artificial intelligent,  adaptive control and optimum control, intelligent house control systems.

Research Publications

Ho D.L., Ngo C. C., Tran T. H. An adaptive fuzzy logic controller for robot manipulator// International Journal of Advanced Robotic System, vol.1, num.2, 2004.

Ngo Cao Cuong, Ho Dac Loc, Tran Thu Ha. Adaptive control of nonlinear dynamics system based on RBF network. ICMIT 2003 Korea, December 4-6, 2003.

Ho Dac Loc, Ngo Cao Cuong, Tran Thu Ha. "Adaptive fuzzy logic control dynamic non-linear system", The Science and Technology, University of Technology, Vietnam N048 and 49/2004.

Tuan Do-Hong

University

Ho Chi Minh City University of Technology, Vietnam

Focus Area

Manufacturing
Systems & Architecture
Software for Multicore

Activities with Intel Curriculum Development

Background

Academic qualifications:

  • 2004: Ph. D. Degree (Munich University of Technology,Germany)
  • 2000: M. Sc. Degree (Munich University of Technology,Germany)
  • 1998: M. Eng.Degree (Ho Chi Minh City University of Technology, Vietnam)
  • 1994:Bachelor of Engineering Degree (Ho Chi Minh City University of Technology,Vietnam).

Teaching courses:

  • Low-Frequency Electronic Circuits, High-Frequency Electronic Circuits, Communication Systems, Digital Communications, Stochastic Signal Processing, Digital Signal Processing , Digital Image Processing, Analog Signal Processing, Stochastic Signal Processing, Linear and Nonlinear Microwave Circuits, Microwave Engineering Lab

Projects:

  • Simulation of Field Strength in Outdoor Environment for Mobile Communication Systems, 2005 , at Ho Chi Minh National University, Vietnam.
  • Efficient Smart Antenna Architecture for High Altitude Platform Communication Systems , 2004, at Munich Uni. of Technology, Germany.
  • Wideband Direction-of-Arrival Estimation , 2003, at Munich University of Technology, Germany.
  • Estimation of Reduction of Exposure by High Altitude Platforms Based Systems with Smart Antennas , 2002, Munich U of Technology, Germany.

Research Interest

Electronics and Telecommunications Engineering

Research Publications

T. Do-Hong, W. Fisch, P. Russer, "Direction finding using spectral estimation with arbitrary antenna arrays", 2001 IEEE MTT-S International Microwave Symposium Digest (IMS 2001) , vol. 2, pp. 1387-1390, May 2001.

T. Do-Hong, P. Russer, "Analysis of wideband direction-of-arrival estimation for closely-spaced sources in the presence of array model errors", IEEE Microwave and Wireless Components Letters , vol. 13, no. 8, pp. 314-316, September 2003.

T. Do-Hong, F. Demmel, P. Russer, "Wideband Direction-of-Arrival Estimation Using Frequency-Domain Frequency-Invariant Beamformers: An Analysis of Performance", IEEE Microwave and Wireless Components Letters , vol. 14, no. 8, pp. 383-385, August 2004.

N. Tran-Minh, T. Do-Hong, "Prediction of Average Power Distribution in Indoor Wireless Communications by using Ray-Tracing Technique", Proceedings of t he 2nd Asia Pacific International Conference on Information Science and Technology (APIC-IST 2007), December 2007.

E-mail

do-hong@hcmut.edu.vn
tuandohong@yahoo.com